Archive for 'CO Detectors'

Carbon Monoxide Detectors Are Critical To Your Safety – Choose The Right Type

Posted by:

Carbon Monoxide Detectors Are Critical To Your Safety – Choose The Right Type

It’s odorless, colorless and tasteless. Early symptoms of exposure to it may be mistaken for a simple case of the flu. Yet, carbon monoxide (CO) is the leading cause of residential poisoning fatalities in the United States. Each year about 500 Americans die from breathing it — nearly half in their sleep — and over 15,000 require hospital treatment. Produced by incomplete combustion of common fuels like coal, oil, gasoline and natural gas, CO silently accumulates in enclosed spaces and ...

Continue Reading →
0

CO2 Detectors: Make Sure You Have Them In The Right Places

Posted by:

CO2 Detectors: Make Sure You Have Them In The Right Places

When you close your home up against the cold, you should be aware that your heating system could pose a potential risk to your family. Carbon monoxide (CO2) will be generated by any fuel-burning furnace, whether that fuel is oil, natural gas, or propane. CO2 is usually safely vented out of your house, but leaks can occur. Humans cannot detect this deadly gas, and in the right concentration, carbon monoxide can kill.

You can keep your family safe from this unseen ...

Continue Reading →
0

Carbon Monoxide Detectors: Make Sure You Put Them In The Right Places

Posted by:

As winter comes in, we’re all going to be sealed up in our homes with our heating systems on. Carbon monoxide is a gas emission from anything that burns fuel. So, if you have gas, oil, kerosene or wood heating, or even an attached garage, your Charlotte-area home is a prime candidate for potentially deadly carbon monoxide.
If you don’t have carbon monoxide detectors, get them. They are actually required by Mecklenburg County Building Standards.

They should be a low level ...

Continue Reading →
0